Remote TP is application that runs on a tablet for emulating the functions of DENSO ROBOT teach pendant.
You can easily operate Remote TP since buttons and touch panel operations are just like the teach pendant ones.
You can connect Remote TP to your COBOTTA and robot controller to perform configuration, monitoring, and program check.
If you connect Remote TP to your COBOTTA, you can control the COBOTTA from the Remote TP.
Note that if you connect Remote TP to a robot other than COBOTTA, you cannot control the robot from the Remote TP

Operation has been confirmed on the following tablets.
- ASUS ZenPad 3 8.0 (Z581KL) (Model number: P008)
- Lenovo Tab P10 (ZA450034JP) (Model number: Lenovo TB-X705L)(Available in COBOTTA version 2.8.0 and later)
- Panasonic FZ-L1(FZ-L1ADAZZAJ) (Model number: FZ-L1)
- SAMSUNG Galaxy Tab Active2(SM-T395NZKAXNZ) (Model number: SM-T395)
- Lenovo Yoga Tab 11(ZA8X0031JP)(Model number：Lenovo YT-J706X)(Android 11)(Available in COBOTTA version 2.20.0 and later)
- Lenovo Tab M10 Plus(3rd Gen)(ZAAN0158JP)(Model number：Lenovo TB-128XU)(Android 12)(Available in COBOTTA version 2.20.0 and later)

The following shows the recommended operation environment for other than above models.
- Display size 8 inches or more
- Communication : Terminals that support Sim and USB tethering
Please note that the Wi-Fi model may not be able to communicate using USB tethering.
- OS : Android 5.0 to 12
Version 1.5.1 and later supports Android 9 and later.

If you want to disable the automatic update of the Remote TP, please follow the procedure below.
1. Go to the following page with the "Play Store" application of Android terminal.
https://play.google.com/store/apps/details?id=com.denso_wave.rc8.remotetp
2. Touch the setting icon (three points) in the upper right.
3. Uncheck the "Enable auto update" checkbox.