Handy VLC based software to easily add, reorder and view multiple RTSP or HTTP video streams. It also supports native access protocol for XmEye and Hikvision cameras. From 1 to 16 cameras can be displayed simultaneously on one screen using different layouts (depends on device performance). Streams can be added manually (see examples below), via network discovery or by importing stream configuration from another device or backup file. Also it is possible to record a video or make a photo while viewing a stream. Stream settings, video and photo files can be shared with others. Streams can be grouped. App can be used as a proxy for remote accessing the streams that are located in the local network (does not apply to the TV version).

You can configure low and high video quality URLs. Audio can be enabled or disabled on a per-stream basis. The low quality video URL is used by default. Try RTSP over TCP option when video is not showing up by default.

In single stream mode it is possible to switch between low and high quality URLs, turn stream audio Off/On/alwaysOn, make photo and record video, zoom video stream, perform PTZ operations.

In multi-stream mode a maximum of 16 (parameter is changed in settings) streams can be viewed simultaneously at one screen (depends on device performance). Audio can be turned Off/On/alwaysOn.

Manage video and photo files from within the app. Review you archive, delete unnecessary files, view videos and photoes with zooming capabilities, make photo while viewing a videos from archive. Share files with others or backup to Drive (does not apply to the TV version).

For setting up and using proxy please read "How it works" in "Proxy" section of the App.

On Mobile version of the app no ads are shown if you have up to 3 streams and don't use Proxy feature. On TV version no ads are shown at all but free version has a view limit of 3 streams.

URLs for testing:

With audio
rtsp://rtsp.stream/pattern (use RTSP over TCP option)
rtsp://wowzaec2demo.streamlock.net/vod/mp4:BigBuckBunny_115k.mp4

Without audio
http://88.131.30.164/mjpg/video.mjpg
http://212.170.100.189/mjpg/video.mjpg

URL examples (user, password, XXX and IP address need to be replaced with your values):

Hikvision camera
high quality: rtsp://user:[email protected]/h264/ch1/main/av_stream
low quality: rtsp://user:[email protected]//h264/ch1/sub/av_stream

XMEye camera
high quality: rtsp://192.168.0.55:554/user=XXX&password=XXX&channel=0&stream=0.sdp
low quality: rtsp://192.168.0.55:554/user=xxxxx&password=xxxxx&channel=0&stream=1.sdp

XMEye network video recorder (NVR)
high quality: rtsp://192.168.0.55:554/user=XXX&password=XXX&channel=XXX&stream=0.sdp
low quality: rtsp://192.168.0.55:554/user=XXX&password=XXX&channel=XXX&stream=1.sdp