It is an application that visually shows how to cut parts from plates in the most appropriate way. It is designed for use by furniture makers, builders, carpenters or similar piece cutting jobs. It takes the lengths of the pieces entered in the list and places these pieces on the plate in the most appropriate way. It is practical and fast ...

USE OF:
Track lengths; It is entered in the Long Edge (mm), Short Edge (mm) and Quantity sections and added to the list with the 'plus' icon on the right. For the PVC Long Edge and PVC Short Edge sections, the total number of edges to be PVC is entered. For example, if you want to cut 5 pieces out of 800 by 700 pieces and if you want to cover 8 long sides and 2 short sides of these 5 pieces, 8 and 2 values ​​are relevant. That is, you should write the total number of edges you want to cover with PVC. The added elements will appear in the list below. With the 'cross' and 'tick' symbols in the list, you can delete the element or change the element settings (click).
If you enter an element with the same properties, the application adds its Quantity and PVC values ​​to the previously existing element in the list.

Come On Then What Are You Waiting For? Start Cutting Pieces Now!