Use the app to monitor up to 6 Bulltron batteries connected in parallel. The connection is made via Bluetooth or WLAN (depending on the battery configuration).
Bluetooth is the default connection when you are near the battery. The WiFi connection relies on a WiFi near the battery with an existing internet connection through which the data can be transferred. This also makes it possible to monitor the battery remotely.

The app offers the following functions and setting options:
●Change battery names
●Calibrate charge level to 100%
●Calibrate zero current display
●Set the Bluetooth signal to be switched off
●Lower charging temperature limit
●Visual and acoustic alarms
●Various alarm functions (e.g. charge level low)
●Time-limited shutdown (charging & discharging)
●Restart BMS
●Firmware update
●Change password

The following values/displays are displayed in real time in the app:
●Temperature
●Voltage in volts (V)
●Current in amperes (A)
●Power in Watts (W)
●Rated capacity in amp hours (Ah)
●Remaining capacity in ampere hours (Ah) and %
●Time until full or empty
●Number of charging cycles
●Loading/unloading allowed
●The battery transmits information as to whether charging or discharging the battery is “permitted” or “stopped” due to an error message, such as an increased temperature.
●Heating “ON/OFF”
●Max. Cell voltage
●Min. Cell voltage
●Cell voltage difference
●Battery production date
●Battery code
●Firmware version