An easy-to-use application for farmers with an MPC+ automatic seed corn header.

It allows you to operate, manipulate and adjust the various parameters necessary for the proper use of the MPC+ cutting bar.

With this application you will be able to:
* Control your tool via Bluetooth.
* Turn your MPC+ castration bar off/on.
* Enable/Disable each module independently.
* Adjust the cutting and tearing height of the module forks.
* Adjust the initial height of each electric cylinder independently for better cutting precision.
* Choose the descent/ascent responsiveness of the modules.
* Configure the descent/ascent responsiveness values.
* Choose the Tire or Knife working mode of the modules (the height of the electric cylinders of the modules may be different between the 2 modes, and is recorded in the database).
* Unfold/Fold the MPC+ castration bar.
* Customize the name of the MPC+ castration bar and its number of modules.
* Select the MPC+ castration bar folding type.
* Access the MPC+ castration bar user manual.

Advanced settings allow you to:
* Choose the control modules for the different functions of the MPC+ castration bar.
* Set the different operating times of the modules.
* Remove/Add/Modify an MPC+ Castration Bar.
* Remove/Add/Modify modules.

All parameters and selections are saved in the database and then restored each time the MPC+ castration bar is used.
The Bluetooth connection and the presence of each module is constantly checked to ensure the proper functioning of the MPC+ castration bar. An alert appears if there is a problem.