BC-1000 combines with smart phone and battery charger, it adopts the most advanced 9 stages charging to effectively maintain and extend the service life of car battery. It not only can charge Lead-acid batteries but also LiFePO4. It works with Mashin IBC System App, just simply connects with Bluetooth of your smart phone then you can use all the charging and testing functions of BC-1000. Besides that, BC-1000 obtained the CE certification for you to use safely without any dangers.

BC-1000 battery charger with following characteristics:
Charging Mode：
Normal, Snow, Boost, LiFePO4, Advanced and ISS.
Battery Types：
Wet, MF, Gel, EFB and AGM battery.
Power Supply Mode.
Complete Safety Protection：
Short Circuit, Over-temperature, Spark, Over-charge
Over-voltage, Reverse Polarity, Disconnecting, Over-current
Simple Testing Program：
Battery Test, Cracking Test, Charging Test.
The Patent 9 Stages Charging：
Soft start:
Tests if the battery can accept charge, charging will commence if
battery is okay.
* Boost Mode will charge by high voltage.
Pulse:
Pulsing current removes sulphates from the battery plates and restores
battery efficiency and capacity.
Bulk Charge:
Charging with maximum constant current until approximately 80％ of
capacity.

Absorption:
Charging with constant voltage and declining current to equalize and
maximize up the battery capacity.
Aftercharge:
Charging by equalizing the battery plates in order to increase the battery
efficiency and extend service life.
Test:
Tests if the battery can hold charge. If the battery voltage drops below
11.6V within 10 minutes, battery is faulty.
Float:
Keep the battery voltage at maximum level by providing a constant voltage charge.
Maintenance:
Battery maintenance mode active when the battery voltage is lower
than 12.6V, the charger will begin maintenance charging automatically.
Cycle Recharge:
A continuation of the Maintenance mode that monitors battery voltage
and will gently pulse current and increase voltage. It will charge
automatically every 15 days.