FlashVisio allows you to capture a visible or IR light pulse. Once the signal has been acquired, the app will show its waveform on the screen and automatically will calculate the pulse duration. Using the movable cursors you can perform manual measurements on the entire portion of the captured signal. Data and graphic screens can be saved in local memory or sent remotely via email. FlashVisio can also generate flash files compatible with LxMeter app.



Please, note that this app requires an external sensor (SS06). The sensor can be DIY assembled as described on the website: http://www.optivelox.com/DL_en/ss0x.htm

Here are some FlashVisio applications:

- Measurements of flash durations of speedlight strobes
- Timing measurements of strobe lamps
- Analisys of IR remote control output signals

Main specs:

- Sweep or Strip-Chart time mode
- Automatic detection & measurement of the light impulse
- Trigger function with adj level
- Full pan & pinch zoom
- XY cursors
- Vertical measurement cursors
- Measurement range: 20us ÷ 5s
- Images and data can be saved in internal memory or attached to emails
- Data are exported in .csv format or cfdb format (LxMeter)
- User guide included
- Free of ads