Manage every parameter of your Launchpad PTZ system from the convenience of your smartphone.

Pairing - Pair transmitters and receivers right from your iPhone or iPad.

PTZ Camera Control - Configure your PTZ camera settings, such as pan, tilt, zoom, focus, etc... with your phone. No camera control unit is needed to enable this function in the app.

Spectrum Analyzer - Scan local wireless spectrum and configure the optimal 5GHz channel for your Launchpad PTZ.

Channel Selection - Manually select a 5GHz (40 MHz) channel. Launchpad PTZ can also be set to operate over 20 MHz channels for better wireless performance.

Quality/Range Analyzer - Monitor the quality and range of your wireless link.

3D LUT Selection - Achieve the look you’re after with Launchpad PTZ’s integrated 3D LUT technology. Select from LUT presets or upload your own into the app.

Quality Selection - Choose between several modes of operation: Maximum Quality, Maximum Range and Balanced.

Output Format - Select the output resolution and framerate.

Test Pattern - Output a test pattern.

Audio Settings - Enable a tone to ring when camera recording is triggered, or mute sounds on the device.

Display Settings - Adjust display light output.

System Info - Check the current firmware version and apply updates when available. Also performs factory resets directly from the app.