Dolores 3 app - Calculation of load securing

Dolores 3 is the successor of the famous Dolores app. The Cargo Securing App Company Dolezych GMBH & Co. KG and the Steinbeis Research Center "Institute for Transportation and Logistics (ITL) Bremerhaven" enables convenient calculation of the required load securing. Thus, for. Example, be found inverted, the number of securing means for a given pretensioning force (STF) or required strength (LC) or. The calculation is performed in accordance with DIN EN 12195-1: 2010 (6/2011) or VDI 2700 Part 2 (7/2014) or sheet 9 (4/2006). In addition, can still use the old method DIN EN 12195-1: 2003 (4/2004) and VDI 2700 Part 2 (11/2002) be used.

The following calculation method was safe and risk of tipping load are available:

- lashing
- Diagonal
- Inclined longitudinal or transverse
- Combination of low and Diagonal
- Securing of hard paperrolls

Dolores 3 offers various possibilities of calculation:

- All acceleration coefficients are determined by selection of the transport path or entered directly
- The Kippgefährdung is considered on the basis of the charge data and the focus can be given
- It can angle or lengths are input (asymmetrical)
- Block / fit is considered (including Code XL.)
- The sliding friction can be, inter alia, to enter on the basis of loading goods and loading..
- The transfer coefficient k (DIN EN) can be selected between 1.5 and 2.0 in 0.1 increments
- The result is shown in detail against sliding and tilting in all directions

Dolores is constantly weiterentwicklelt. In the future, you will regularly receive new features and languages ​​added.