The NFC Configurator App is used to configure the SWAN2 wireless M-Bus / NB-IoT Gateway and CRANE wireless M-Bus/OMS Repeater of WEPTECH elektronik GmbH over NFC.

1. Download and start the app.
2. Simply connect the NFC touchpoints of your WEPTECH product and your android device and follow the instructions.
3. Set your required parameters and write it to your WEPTECH device.

SWAN2:
Following features can be configured:

1. Save and load or clone configuration.

2. Main configuration
◾ NB1-Network Configuration
◾ Upload Settings for data
◾ Collect Settings for data
◾ Time setup
◾ Further settings

3. Address management
◾ See radio scan list
◾ Manage Whitelist

4. Device Installation
◾ Test NB1 connection
◾ Set device time via NTP
◾ Collect data
◾ Upload data
◾ Build radio scan list

5. Device Management
◾ Change password
◾ Firmware Update
◾ Shipping mode
◾ Factory Reset
For more information or support:
click here

CRANE:

1. Main configuration
◾ Wireless M-Bus Tx and Rx mode
◾ Set repetition device list
◾ Set Tx interval, security profile, duty cycle
◾ manage radio scan list
◾ Load and save configuration

2. Firmware Update

3. Factory Reset
For more information or support:
click here

Also watch the configuration-video in the gallery.