Send the barcode to the input area of the PC and acquire and display the PC screen image.

This application is test compatible with reading GS1-Databar Limited, GS1-Databar Stacked!( * Only when [TARGET ON])
* Because "GS1 - Databar Limited, GS1-Databar Stacked" is read using its own decoding engine, there are differences in reading method and response from other bar codes.
* Only barcodes on the horizontal guidelines are read. It can not be read in the vertical direction.
* Other standards of GS1-Databar are not read.
* In the case of composite code, if the base bar code is GS1 - Databar Limited / GS1-Databar Stacked, it reads only there.
* It may not be able to be read well because of the examination correspondence.

This application will not work on terminals that do not have "Google Play services" installed.


- PC side program (for Microsoft Windows) is required. Please download from the URL below.
- For the operation explanation, please see the following URL.
https://trl.mswss.com/


(1) Send the barcode value read by the Android terminal to the PC.
(2) Paste to the input area with the focus on the PC screen via the clipboard.
(3) Next, send the set Enter or Tab key to the input area.
(4) Capture the image around the input area on the PC screen.
(5) Display capture images on Android terminal.
* The order of (3) and (4) depends on the setting.


- It can be used free of charge.
- The processing result can be confirmed by capture image.
- Readable 1D Barcode: EAN-13, EAN-8, UPC-A, UPC-E, Code-39, Code-93, Code-128, ITF, Codabar (NW 7), GS1-Databar Limited, GS1-Databar Stacked
- Readable 2D Barcode: QRCode, DataMatrix, PDF417, AZTEC
- Barcode reading is checked twice by reading (misreading prevention).
- It can be read aiming at the barcode on the cross line (misreading prevention).


- There are things that can not be read even with the corresponding bar code. Please try.
- Binary data bar codes can not be sent.
- Barcodes including TAB code (0x09) can not be transmitted.
- Destination PC side Depending on the target program, transmission and screen capture may not work well.
- The transmittable bar code value is 1000 bytes.
- Communication is restricted within the LAN. It is not compatible with WAN.