This application is simple camera that be able to take picture of the image overlay with silent mode.(when disable of shutter tone is set)
Adjust transparency of the overlay image.


■Operation
Camera mode
-Capture a image(Take a picture) by tapping the shutter icon(Top-Right on display).
-The following can be set from the icon on the screen.
　　-Exposure compensation setting
　　-Setting ON or OFF of flash(Except for some models)
　　-Select camera Front-facing or Back-facing(Except for some models)
　　-Other mode setting
　　-Display of the captured image(Start-up the viewer mode)
　　-Select overlay image
-Adjust permeation level of the overlay image by slidebar on left side of display.
-About other mode setting.
　(Except for some models)
　　-Setting enable or disable of shutter tone
　　-Setting ON or OFF of flash(Except for some models)
　　-Setting focus mode
　　-Change resolution of saved image
　　-Setting image effect
　　-White balance setting
　　-Scene mode setting
　　-Anti-banding setting
-About overlay image.
　　-The available image file is png, jpg and bmp.
　　-The overlay image is moved by a drag.
　　-The overlay image is expand, reduced and rotated by a tap.
　　-select a plug-in image available.
　　　(If the plug-in image is installed)
-Support functions for capturing image.
　　-Grid view mode
　　-Show gyroscope\n
　　-Save the image without the overlay image
　　-Rotate 90 degree automatically overlay image when orientation of capturing image is changed
　　-Mirroring overlay image
　　　If the captured image by the front-facing camera is mirrored, Please enable setting.
　　(usually enable)
-The captured image is saved in
　　sdcard/mizmon21/PiPCamera

Viewer mode
-The image is moved by a drag.
-Reduced by pinch in.
-Expanded by pinch out.
-[menu]-[Share]
ex. Attached the image to e-mails.

note:
Access to the Internet(for ads Delivery).
When using the PiP camera, please observe the laws, rules, local laws and the manners.


(c)2011-2013 mizmon21