1. In the design and measurement screen, the user enters the amount of water, amount of coffee beans and amount of coffee brewed.
2. The remaining values ​​related to the entered value are set.
3. Check the Coffee Brewing Control Chart with the designed value.
4. Click on the chart where you want to manufacture.
6. Pressing the readjust button lists the conditions under which the desired TDS and brew rate can be achieved by adjusting the designed value.
7. Click Apply Selected Conditions to move to the design and measurement screen again, and if you tag the NFC tag of the measuring instrument, the measured TDS is updated.
8. Check the chart again to check the difference between the designed and actual measured values.