This application is used to collect on the foundation loads. Load collected in 6 steps:

1. Load the walls. You have to specify the size of your home, the number of floors and the height of the floor. Also, a large number of schemes at home, you can choose your, specify the material and wall thickness. At the same time it will be calculated weight of all the walls, and you can proceed to the second stage.

2. The load on the overlap. There are 4 types of slabs (reinforced concrete, wood, hollow metal plate and even overlap). The load will be collected by multiplying the floor area in the load average figures of its own weight of overlap.

3. The load on the roof. Here you need to choose the type of your roof (out of 4 present), specify the material and the required values. Then this will be calculated taking into account the weight of the roof truss system.

4. The load from the foundation. It is necessary to select the type of the foundation (the ribbon, slab, columnar or pile), select a foundation material, and again the necessary parameters to form the foundation width, height, etc. In the calculation of the foundation it is considered that it is under all walls.

5. Load the internal finishing. Here you can set only the materials used in the interior decoration of the walls, floors, ceilings and exterior, and online calculations on the basis of the previous steps, already considers itself to some extent.

6. The final phase. You need to set the payload (load it on furniture, people, etc.) and snow loads (SNIP 2.01.07-85 * "Loads and effects" Annex 5, map 1).

As a result of this application you will be able to observe individual weight of your walls, floors, etc., floor area, ceilings, internal walls, external walls and roof area. Also, the application will calculate you a lot of houses and a lot of houses with useful, snow load, multiplied by the corresponding coefficients.

As the final result, the program will calculate the area of ​​supporting the foundation to base the maximum possible load on this basis and actual load. After that, all it compares and displays the result in the form of messages, sustain the foundation of your house or not.